Detailed Description - ROMPA 18549 Manual De Instrucciones

10. Detailed Description

Lie back and relax, feel the vibrations, listen to the music and watch the soft clear balls
gently change colour. Maximum use of minimum space makes it ideally suitable for
domestic use. Use a quality music system with at least 50w per channel. Alternatively
ROMPA® can supply a Music System 20304. Requires balls. The walls are 15cm thick, and
the interior is white unless otherwise specified. The colour of the exterior can be chosen.
OPERATION
A 2-way speaker control is provided to allow a selection of sound and vibrations either
through the integral Vibro Tub speakers, through external speakers, or both at the same
time.
1. Insert the two leads from the integral speakers into SPEAKER #1 OUT on the 2- way
switch.
2. Insert leads from external speakers into SPEAKER #2 on the 2-switch.
3. Insert leads from music system into SPEAKER INPUT on the 2-way switch.
4. Plug in music system.
5. Select the required operation (tape/CD/radio) and adjust volume to required level.
6. SWITCH 1 on the 2-way switch operates the integral speakers in the Vibro Tub. SWITCH
2 on the 2-way switch operates the external speakers. Any variation may be selected.
PLEASE NOTE: A high bass setting produces more vibration.
PLEASE NOTE
Music Systems supplied approximately 2008 onwards may have different speaker
connections compared with those of earlier models of music systems. Please refer to the
diagrams below in case you have a newer model of music system. Older models of music
systems tended to have small sockets with a round hole in that were covered by a small
pushable cover (often red and black):
Please refer to the revised image below to show the connection of ROMPA
newer models of music systems:
®
products to