Technical Data - Blanco ALTA HD Manual Del Usuario

Installation and care instructions
GB
We have put together the most important product information
to enable you to benefit from the high degree of functionality and the
first class comfort provided by BLANCO taps.
Parts list BLANCOALTA HD
1 Lever
2 Screw cover +
Fixing Screw
Covering ring
3
Cartridge
4
5 Outer body
6 Set plastic rings
Flow Straighter
7
Body seals
8
Fixing kit
9
10 Flexi hose, 1 pair +
Seals
11 Stabilisation triangle

Technical data

Use
• Pressurised hot water tank and instantaneous
water heater
• Not suitable for low pressure hot water tank/hot
water tank
Operating pressure
• Min. 0.5 bar
• Max. 10.0 bar
Temperature
• Max. 70° C
Note
pressure differences between cold and warm water
connection should be less than 3 bar otherwise the
mixing ratio deviates from the lever position.
Symbols
right wrong
Illustrations
1
2
5
6
7
further illustrations on the back fold-out flap
12
When tap has been fitted check:
tightness, movement, full jet of water
Please note the following advice and the
illustrations on the back fold-out flap.
Illustrations
13
16
18
Important
in the event of a query, please enter the 11-digit
Article Number (see wrapper on the cold water hose
of your tap) .
Example
recommended
th is B L A N C O
Installation
Tap hole: 35 mm
- 4 Attach tap
NOTE: don't forget the seal between tap
and supporting surface!
Flush the pipe work to remove foreign debris
from the system. When the tap has been
connected check for leaks,movement and flow
rate/pattern.
Recommendation: fit dirt filter
- Connect flexi hoses
11
Rinse perlator/ jet regulator
Care
- Use soft (microfibre) cloth and mild cleaning
15
agent
- 17 Take care with hard objects
- Cleaning the perlator/ jet regulator with
20
vinegar
n s o n b u y in g
C o n g ra tu la ti o
e y o u
ta p – w e h o p
w it h it !
a re d e li g h te d
2