Idiomas disponibles
Idiomas disponibles
Do not make holes in the battery with objects. Do not hit the battery with a hammer. Do not step on the battery,
or apply strong impacts or shocks to it.
Do not put the batteries in or near a fi re, or into direct sunlight. When the battery becomes hot, the built-in safety
equipment becomes energized and can stop the battery charging process. If the battery becomes hot, damage can
occur to the safety equipment and this can cause more heat, damage or ignition of the battery.
Do not put the battery on a fi re or increase the temperature of the battery with heat.
Do not put the battery on or near fi res, stoves, or other high-temperature locations.
Do not solder directly onto the battery.
Do not use the battery if, when you use, charge, or store the battery, there is an unusual smell from the battery,
the battery feels hot, changes color, changes shape, or is in an unusual condition. Contact your sales offi ce if one
or more of these problems occurs.
Only use a specifi ed battery charger when you charge the battery.
The temperature range through which you can charge the battery is ±0 °C to +45 °C (+32 °F to +113 °F). If you
charge the battery at temperatures out of this range, it can cause the battery to become hot or to break. It can also
decrease the performance or the life cycle of the battery.
en-US
The temperature range through which you can discharge the battery is −15 °C to +50 °C (+5 °F to +122 °F). Use of
the battery out of this temperature range can decrease the performance or the life cycle of the battery.
When the battery is worn, apply insulation to the terminals with adhesive tape or similar materials before you dis-
card it.
Do not apply solvents or similar liquids to the camera, the cables, or other items. This can cause damage.
Be careful when you clean the infrared lens. The lens has a delicate anti-refl ective coating.
Do not clean the infrared lens too vigorously. This can damage the anti-refl ective coating.
Disposal of electronic waste
As with most electronic products, this equipment must be disposed of in an environmentally friendly way, and in
accordance with existing regulations for electronic waste. Please contact your FLIR Systems representative for
more details.
Laser warning label
A laser warning label with the following information is attached to the camera:
Wavelength: 635 nm. Max. output power: 1 mW.
This product complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50,
dated July 26th, 2001.
