Idiomas disponibles
Idiomas disponibles
• IMPORTANT: Washing the filters improves vacuum
performance. Make sure all filters are completely dry
before reattaching them.
• Only clean the housing with a soft, dry cloth. Do not
use liquid or aerosol cleaners.
• Store the vacuum cleaner indoors in a cool, dry
area, out of reach of young children.
• Never attempt to open the motor base of the
vacuum cleaner yourself or to replace the power
cord. If the vacuum cleaner is damaged, it must be
repaired by the manufacturer or its service agent or
an appropriately qualified person in order to avoid
a hazard. In case of damage, call the after sales
support line for advice.
WARNING!
• Never use this machine when the suction power
becomes very weak.
When this happens:
• Switch off the unit, unplug it and check whether
the dust container is full.
• Then check if any part of the floor brush, tube or
hose is blocked.
Do not use the vacuum cleaner until the blockage is
removed and it operates normally again.
If you cannot solve the problem, contact the after
sales support line.
• Always switch the vacuum cleaner off after use,
and before plugging it in again, make sure to hold the
vacuum cleaner firmly when using it.
• Always switch off and unplug the vacuum cleaner
from the electrical outlet before assembling, opening
or emptying the dust bag, or before connecting/
disconnecting the attachments.
Parts
1. Handle
2. Front cover
3. Lock clip
4. Front cover decorating plate
5 Accessories cover
6. Back cover
7. Cord rewinding button
8. Outlet plate
9. Speed control cover
10. Speed slide button
11. ON/OFF switch button
12. Dust Full Indicator
13. Power cord and plug
14. main body
Accessory List
A set of hose accessories, one metal tube, one floor
brush, one suction nozzle, one round brush, one
square brush
Operation Methods
1. Connect the hose accessory: insert the hose end
into the hose socket at the front cover and then
hook it.(Fig 1)
Remove the hose accessory: turn the connector of
hose to the right position and then pull the hose
accessory. (Fig 2)
2. Connect the metal tube to the curved end of the
hose. (Fig 3)
3. Connect different nozzle tools to the tube for
different cleaning purposes: floor brush (adjusted
to the type of ground) for carpet or hard floor (Fig
4);crevice nozzle for sofa, wall surface, curtain
,corner of space between furniture and etc. (Fig 5)
Your vacuum cleaner is now ready for use.
4. Operating the vacuum cleaner: insert the plug
and cord into the power socket which conforms to
that on the label for the power supply, and press the
on/off switch pedal, the vacuum cleaner will start
working. (Fig 6)
5. Adjust the vacuum power: Use the symbols on
the vacuum power display as a guideline, press
the +button(increase vacuum power) or the –
button(reduce the vacuum power). (Fig 7)
13
