1
Screw the A Casters into the threaded end posts of
the B Left Side Panel and the C Right Side Panel.
B
AND
C
3
Turn the unit right side up. Place the F Stepped
Base into the bottom of the unit, hooking the rear
hooks behind the ball on each side panel , and the
front hooks over the bottom wires next to the front
casters.
HOOK
BALL
HOOK
3088-37: 2 of 3; Rev. 2; 7/97
A
HOOK
BALL
HOOK
F
5
Finally, place the remaining D Front/Back Panel
flush with the top shelf and the front of the stepped
base, and fasten with two E Spring Clips to each of
the shelves and three to each side panel.
E
E
2
Arrange the B Left Side Panel, the C Right Side
Panel, and one of the D Front/Back panels as
shown, upside down and with the inner cross wires
toward the OUTSIDE of the unit. Press E Spring
Clips over the pairs of wires at each corner, in the
locations shown, from the OUTSIDE of the unit.
C
8 SQUARES
WIDE
E
CORNERS FLUSH
4
Position one of the G Shelf Panels two wires above
the back of the stepped base, and attach with two E
Spring Clips along the back and two on each side.
Now position the other shelf panel two wires down
from the top, and fasten the same way.
E
E
E
E
D
E
B
CROSSWIRES ON OUTSIDE
E
BALL TO BACK
D
E
G
E
