Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
globalindustrial.ca
Assembly Instructions
Customer Service
US: 1-800-645-2986
Rectangular Metal Mesh Picnic Table
These Assembly instructions and Warnings should be retained by maintenance or safety
department for future reference. Routine maintenance and inspection of the equipment
should be performed every six months. Damaged and worn parts should be removed from
service until replaced or repaired to prevent safety hazards.
WARNING
• Assembly and installation of equipment
should be performed by 2 people.
• Workers should use OSHA approved
safety and lifting equipment.
WARNING
• This product contains chemicals which
are known by the state of California to
cause cancer, birth defects or other
reproductive harm.
Instrucciones de Ensamblaje
Servicio de atención al Cliente
México: 01.800.681.6940
Models
96" ADA 695289BL/GN/BK
72" 277152BL/GN/BK
96" 277153BL/GN/BK
72" 694555BL/GN
96" 694553BL/GN
1
Distribucion Industrial Globales S DE RL DE CF
Directives d'assemblage
Service à la clientèle
Canada: 888-645-2986
WARNING
• Do not climb on, under or through
tables and benches.
• Two people required to move tables and
benches.
• Do not use if any parts of bench or table
are broken or damaged.
• Inspect and tighten hardware every six
months.
• Replace rusted hardware and damaged
components.
061515
Resumen de contenidos para Global ADA 695289BL
- Página 1 Service à la clientèle México: 01.800.681.6940 Canada: 888-645-2986 US: 1-800-645-2986 Rectangular Metal Mesh Picnic Table Models 96" ADA 695289BL/GN/BK 72" 277152BL/GN/BK 96" 277153BL/GN/BK 72" 694555BL/GN 96" 694553BL/GN These Assembly instructions and Warnings should be retained by maintenance or safety department for future reference. Routine maintenance and inspection of the equipment should be performed every six months.
- Página 2 Assembly Instructions Rectangular Metal Mesh Picnic Table Assembly Note: Hand tighten all nuts and bolts during assembly. After assembly, securely tighten all nuts and bolts. CONTENTS Ref. Qty. Description Ref. Qty. Description M8 x 1.25 x 1.75 Lg. Hex Bolt Leg Support Plain Washer Bench...
- Página 3 Assembly Instructions Rectangular Metal Mesh Picnic Table Table MUST be anchored to floor with appropriate Hardware.
-
Página 4: Mesa Rectangular De Picnic De Malla Metálica
Service à la clientèle México: 01.800.681.6940 Canada: 888-645-2986 US: 1-800-645-2986 Mesa Rectangular de Picnic de Malla Metálica Modelos 96" ADA 695289BL/GN/BK 72" 277152BL/GN/BK 96" 277153BL/GN/BK 72" 694555BL/GN 96" 694553BL/GN Estas instrucciones de ensamblaje y advertencias deben ser retenidos por mantenimiento o el departamento de seguridad para futuras consultas. - Página 5 Instrucciones de Ensamblaje Mesa Rectangular de Picnic de Malla Metálica Nota de ensamblaje: Apriete a mano todas las tuercas y pernos durante el ensamblaje. Después ensemblaje apriete firmemente todas las tuercas y pernos. CONTENIDO Ref. Cant. Descripción Ref. Cant. Descripción Pata Tornillo Hexagonal M8 x 1.25 x 1.75...
- Página 6 Instrucciones de Ensamblaje Mesa Rectangular de Picnic de Malla Metálica La mesa DEBE estar anclada al suelo con el hardware apropiado.
- Página 7 Service à la clientèle México: 01.800.681.6940 Canada: 888-645-2986 US: 1-800-645-2986 Table à pique-nique en grillage métallique rectangulaire Modèles 96" ADA 695289BL/GN/BK 72" 277152BL/GN/BK 96" 277153BL/GN/BK 72" 694555BL/GN 96" 694553BL/GN Ces directives d'assemblage et avertissements devraient être conservées par le service d'entretien ou de sécurité...
- Página 8 Directives Table à pique-nique en grillage d’assemblage métallique rectangulaire Remarque d'assemblage: Serrez tous les écrous et boulons à la main pendant l'assemblage. Après l'assemblage, bien resserrer tous les écrous et boulons. CONTENU Réf. Qté Description Réf. Qté. Description Patte M8 x 1,25 x 1,3125. Grande Dessus Support De Patte...
- Página 9 Directives Table à pique-nique en grillage d’assemblage métallique rectangulaire La table DOIT être ancrée au sol à l'aide du matériel approprié.