Axis D2110-VE Manual Del Usuario página 19

Calibrate the radar
The radar is ready to use as soon as it is installed. The default live view will show the radar coverage
and any detected movement, and you can add detection zones and rules right away.
If the radar is mounted 3.5 m (11 ft) above ground, there is no need to do anything else. If the
radar is mounted on a different height you need to calibrate the radar to compensate for the
mounting height.
For more information about calibration, see the User Manual at axis.com
To make it easier to see where objects are moving, you can upload a reference map, for example a
ground plan or an aerial photo, that shows the area covered by the radar.
Image requirements:
• Supported file formats are jpeg and png.
• The image can be cropped in the radar.
• The image can be rotated ±35° in the radar.
• The orientation is not important, since the radar coverage shape will move to adapt
to the image during calibration.
After uploading the reference map you need to calibrate the reference map so that the actual radar
coverage fits the position, direction and scale of the reference map.
There are two methods for calibrating the reference map:
AXIS D2110-VE Security Radar
19
EN