Intended Use; Cleaning And Maintenance - Eldom COLUMBIA VAC OK100 Manual De Instrucciones

INTENDED USE

The vacuum cleaner is intended for fireplace cleaning.
APPLIANCE OPERATION
Read the entire instructions manual carefully before using the vacuum cleaner for the
first time. After unpacking the appliance, make sure that it has not been damaged during
transport. In case of any doubts, do not use the appliance until after contacting the service
station.
Before performing any installation and maintenance works, turn the appliance off
and disconnect it from the power supply.
ASSEMBLY
Before using the appliance:
- open the lid (3) by releasing the fixing clamps (11),
- remove all accessories from the container (12),
- turn the container upside down and install the wheels, spacing them evenly on the
container's circumference Fig. 1,
- install the HEPA filter (5) with the cover (6) Fig. 2. or put the canvas filter (7) on the
container (12) Fig. 3.
- close the lid securely by snapping the clamps (11),
- insert the thicker end of the hose (9) into the port (10) and lock it in place Fig. 4.
- insert the tube (8) into the other end of the hose (9).
GETTING STARTED
- the vacuum cleaner can be moved by using the handle (1),
- make sure that one of the filters (5 or 7) is installed and the hose (9) is connected to the
port (10),
NOTE! Do not use the vacuum cleaner without an installed filter (5 or 7).
- connect the appliance to a power supply with the parameters specified in the manual,
- turn on the appliance by using the switch (2),
NOTE! Do not obstruct the air outlet (4) in the vacuum housing (3) when the vacuum
cleaner is running.
- press the switch (2) to stop the appliance.
- clean the appliance after the work is finished.

CLEANING AND MAINTENANCE

- before performing any maintenance or repair works, turn the vacuum cleaner off and
disconnect it from the power supply.
- regular cleaning and replacement of the filters (5 and 7) and emptying the container (12)
will ensure a failure-free operation of the vacuum cleaner,
- clean the vacuum cleaner's housing, the tools and accessories, and the power cord with
a soft cloth slightly dampened with water and a small amount of dishwashing liquid,
- dry all parts thoroughly before reusing them,
do not immerse the vacuum cleaner in water,
-
- do not use any aggressive cleaning agents to clean the vacuum housing; otherwise, its
surfaces can be damaged.
12|EN