Roborock S7 Manual Del Usuario página 17

Installation
Position the charging dock
1
Keep the Charging Dock on a level surface, flat against a wall.
Connect the power cable to the Charging Dock and tidy cables
from the floor. To ensure a better user experience of the
mobile app, place the Charging Dock in an area with good WiFi
coverage.
More than 0.5m (1.6ft)
More than 1.5m (4.9ft)
Note:
• Allow at least 0.5m (1.6ft) of clearance on each side, and more than 1.5m (4.9ft) in
front of the Charging Dock.
• If the power cable hangs vertical to the ground, it may be caught by the robot, caus-
ing the Charging Dock to be disconnected.
• The Charging Dock indicator is on when the Charging Dock is electrified, and off when
the robot is charging.
• Do not place the Charging Dock in places that are directly exposed to sunlight, and do
not block the Location Beacon. Otherwise the robot may not be able to automatically
return to the Charging Dock.
• Use double-sided tape to stick the Charging Dock down.
More than 0.5m (1.6ft)
017
Secure the charging dock with the
2
adhesive tape
Wipe the floor of the area where the charging dock will be
placed with a dry cloth, then secure the dock in place using
double-sided tape at the bottom of the dock.
Note:
• Use of the double-sided tape to secure the charging dock is optional.
• When necessary, remove the double-sided adhesive tape slowly to reduce residue glue.