allen+roth LP7942LBZ Manual Del Usuario página 10

INITIAL ASSEMBLY INSTRUCTIONS
8. Securely attach the hanger bracket (B) to the outlet
box (not included) using the outlet box screws and
washers supplied with the outlet box.
WARNING: To avoid possible electrical shock, be
sure electricity is turned off at the main fuse box before
hanging.
WARNING: If you are not sure if the outlet box is
grounded, contact a licensed electrician for advice, as it
must be grounded for safe operation.
WARNING: The fan must hang with at least 7 ft. of
clearance from the fl oor to blades.
WARNING: The outlet box must be securely
anchored. The hanger bracket must seat fi rmly against
the outlet box. If the outlet box is recessed, remove
wallboard until the bracket contacts the box. If the bracket
and/or outlet box are not securely attached, the fan could
wobble or fall.
9. Carefully lift the fan assembly and seat the hanger
ball of the downrod (C) on the hanger bracket (B). Be
sure the groove in the ball is lined up with the tab on
the hanger bracket (B).
WARNING: Failure to seat the tab in the groove could
cause damage to electrical wires and possible shock or a
fi re hazard.
WARNING: To avoid possible shock, do not pinch
wires between the hanger ball assembly and the hanger
bracket.
8
B
9
10
C
Lowes.com/allenandroth
B