Changing The Tool - Berner BOT STARLOCK PLUS Manual Original

K
Cutting with plunge cut saw blade:
a
h
K
Cutting with segmential saw blade:
a
h
K
Scraping:
a
h
K
The vibration level and noise emission value given
in these instructions have been measured in ac-
cordance with a standardised measuring proced-
ure and may be used to compare power tools.
They may also be used for a preliminary estima-
tion of vibration and noise emissions.
The stated vibration level and noise emission
value represent the main applications of the
power tool. However, if the power tool is used for
other applications, with different application tools
or is poorly maintained, the vibration level and
noise emission value may differ. This may signific-
antly increase the vibration and noise emissions
over the total working period.
To estimate vibration and noise emissions accur-
ately, the times when the tool is switched off or
when it is running but not actually being used
should also be taken into account. This may signi-
ficantly reduce vibration and noise emissions over
the total working period.
Implement additional safety measures to protect
the operator from the effects of vibration, such as
servicing the power tool and application tools,
keeping their hands warm, and organising work-
flows correctly.
Application tool
Bi-metal seg-
ment saw blade
Sanding plate
for Delta series
93 mm sanding
sheets
Profile sander
1 609 92A 4DC • 13.12.18
BOT STARLOCK PLUS
2
m/s
m/s 2
2
m/s
2
m/s
2
m/s
2
m/s
2
m/s
Fitting
Pull the plug out of the socket before carry-
u
ing out any work on the power tool.

Changing the tool

Wear protective gloves when changing tools.
u
There is a risk of injury when touching the ap-
plication tools.
Selecting an application tool
Please observe the application tools intended for
your power tool.
Application tool
Material Application
Wood-based materi- Separating cuts and plunge saw cuts;
als, plastic, non-fer- including sawing close to edges, in corners
rous metals and in difficult-to-reach areas;
example: Shortening skirting boards that are
already installed or door frames, plunge cuts
when adapting floor panels
Depends on the Sanding surfaces at edges, in corners or in dif-
sanding sheet ficult-to-reach areas;
depending on the sanding sheet, e.g. for sand-
ing wood, paint, varnish, stone;
fleeces for cleaning and for texturing wood, re-
moving rust from metal and for keying varnish,
polishing felt for pre-polishing
Wood, pipes/pro- Convenient and efficient sanding of profiles up
files, paint, varnish, to a diameter of 55 mm;
filler, metal red sanding sheets for sanding wood, pipes/
profiles, varnish, filler and metal
BOT STARLOCK MAX
1.5
11
1.5
6.5
1.5
6
1.5
English
English
English
BOT
PLUS
1.5
10.5
1.5
6.5
1.5
6.5
1.5
BOT
MAX
English | 19