Viewable Screens; Video Modes - Toshiba dynadock U3.0 Manual Del Usuario

The dynadock™ U3.0 (
NOTE
connecting an external display to the dynadock™.
The dynadock may not support VGA displays using Extended Display
NOTE
Identification Data (EDID).
Connect the monitor cable (not provided) to the video output port on the
dynadock and the external monitor. This cable can be connected and
disconnected any time without disconnecting the dynadock from the USB
port on your computer.
The dynadock should be connected to a USB 3.0 port for optimal video
NOTE
performance.
The dynadock will work when connected to a USB 2.0 or 1.1 port, but video
performance will be compromised.
You can customize the video settings of the dynadock. See Adjusting Video
Setting section for more information.

Viewable screens

The dynadock video drivers give you the option of viewing a total of four
screens.
1. The screen on the notebook
2. An external monitor connected to the video port on the notebook
(if available)
3. Two external monitors connected to the dynadock

Video Modes

The dynadock video output works in two modes:
Mirror Mode
■
Extend Mode
■
Mirror Mode
Mirror Mode creates an identical display – from your computer screen to
the external monitor. This is useful, for example, if you want to use a larger
desktop monitor rather than the computer screen. In Mirror Mode,
the dynadock automatically selects the settings (screen resolution, color
quality and refresh rate) for the external monitor that will allow the best
resolution based on your computer's settings.
User's Manual
) icon appears in the system tray after
dynadock™ U3.0
EN-23