Tait T03-22009-AAAA Manual De Instrucciones página 2

If the Tait Programming Cable and the assigned port number do not appear in your Tait
programming application, restart your computer.
For KFD Use
In addition to the kit, you will need the following items
■ Trimble JunoKFD (TE1002-BA00-0000-xxxx or TE1002-BB00-0000-xxxx)
■ USB Host Cable (005-20019-00)
For details on how to use the Key Fill Device, please refer to the Tait EnableProtect Key Fill
Device Help
Important Notes
■ The TP9300 or TP9400 IS radio must be powered by an IS battery while the IS
programming adapter is connected.
■ The IS programming adapter must be used with an IS radio, as its internal circuitry
provides additonal protection for the IS circuitry in the radio.
■ All programming activities are permitted. Calibration activities are only permitted if the
activity can be done with the programming adapter alone. Other connections (e.g. the
antenna port) are not permitted.
■
The IS programming adapter is not approved for use in any hazardous location.
More Information
Refer to your radio provider for more information about this product.
2 T03-22009-AAAA/ACAA/ADAA TP9300/TP9400 IS Programming Adapter
© Tait International Limited 08/2018