Aigostar FT23-16JA Manual De Instrucciones página 4

GB
Front and Rear Guard Installation
1. Place the Front Guard upright, 2. Press down all the Buckles to fasten the Front Guard
with the Positioning Clip aligned with the Rear Guard. At the Screw Holes, tighten the
with the Rear Guard as illustrated. separated screw and nut.(1.Buckle 2.Screw)
6
0 1 2
1. Horizontal Swing
2. Pull-up for static
3. Push-down to swing
4. Swing Pull-knob
5. Tilt Adjustment(Manual)
6. Body key ( 0--off 1—low 2-high)
03
2
1
1
2 3
4
5
MAINTENANCE INSTRUCTION
The fan requires little maintenance. Do not try to fix it by
yourself. Refer it to qualified service personnel if service is
needed.
1. Before cleaning and assembling, fan must be unplugged.
2. To ensure adequate air circulation to the motor, keep vents
at the rear of the motor free of dust. Do not disassemble the
fan to remove dust.
3. Please wipe the exterior parts with a soft cloth soaking a
mild detergent.
4. Do not use any abrasive detergent or solvents to avoid
scratching the surface.
Do not use any of the following as a cleaner: gasoline,
thinner.
5. Do not allow water or any other liquid into the motor
housing or interior parts.
MAINTENANCE INSTRUCTION
1. Be sure to unplug from the electrical supply source
before cleaning.
2. Plastic parts should be cleaned with a soft cloth moisten
with mild soap. Thoroughly remove soap film with dry cloth.
DISPOSAL： Do not dispose of electrical appliances as unsorted
municipal waste, use separate collection facilities. Contact your
local government for information regarding the collection systems
available. If electrical appliances are disposed of in landfills or dumps,
hazardous substances can leak into the groundwater and get into the
food chain, damaging your health and well-being.
WARRANTY: 2 YEARS
GB
04