Enlaces rápidos
MYLEX
43098
CORNER DESK
ESCRITORIO DE ESQUINA
IMPORTANT
TO OUR CUSTOMERS:
THIS PRODUCT HAS BEEN CAREFULLY
QUALITY CONTROLLED, HOWEVER HUMAN ERROR
CAN OCCUR, SHOULD YOU EXPERIENCE
ANY PROBLEMS WITH THE PRODUCT PLEASE
NOTIFY CUSTOMER SERVICE AT:
(416) 745-1733
TORONTO
1-800-668-6959
CANADA & U.S.A
HRS. 9:00am-5:00pm EST.
MONDAY – FRIDAY
TOOLS REQUIRED:
PHILIPS SCREWDRIVER
HAMMER
IMPORTANTE
A NUESTROS CLIENTES:
ESTE PRODUCTO HA SIDO RIGUROSAMENTE
CONTROLADO, SIN EMBARGO, ERRORES
HUMANOS PUEDEN OCURRIR. SI USTED
TIENE ALGUN PROBLEMA CON EL PRODUCTO,
POR FAVOR NOTIFIQUENOS LLAMANDO
A SERVICIO ALCLIENTE AL NUMERO:
(416) 745-1733
TORONTO
1-800-668-6959
CANADA Y USA.
HRS: 9 A 17HRS (EST)
LUNES A VIERNES
HERRAMIENTAS NECESARIAS:
DESTORNILLADOR PHILIPS
MARTILLO
NO.
PART NUMBER
DESCRIPTION
NO. D E PARTE
1
754309801
LEFT SIDE
2
754309802
RIGHT SIDE
3
754309803
DESK TOP
4
754309804
BOTTOM
5
754309805
KICK PLATE
6
754309806
ADJUSTABLE SHELF
7
754309807
RETURN LEFT SIDE
8
754309808
RETURN RIGHT SIDE
9
754309809
RETURN TO P
10
754309810
LEFT MID POST
11
754309811
RIGHT MID POST
12
754309812
SLIDE OUT SHELF
13
353304
14" METAL SLIDE CL
14
353304
14" METAL SLIDE CR
15
353304
14" METAL SLIDE DL
16
353304
14" METAL SLIDE DR
51
300504
CONF IRMAT SCREW
52
300301A
CAM POST
53
300401A
5/8" CAM FASTENERS
54
301103
DOWEL
56
301201
SHELF SUPPORTS
57
300106
6 x 1/2 FLAT ZINC
66
305511
CONF IRMAT CAPS
83
300115
8 X 5/8" WAFER HEAD
84
302209
PLASTIC BRACKET
85
302212
METAL PLATE
DESCRIPCIÓN
QTY.
CANTIDAD
LADO IZQUIERDO
1
LADO DERECHO
1
CUBIERTA DEL ESCRITORIO
1
BASE
2
PLACA DE SOPOR TE INFERIOR
2
REPISA AJUSTABLE
1
LADO IZQUIERDO DEL RETORNO
1
LADO DERECHO DEL RETORNO
1
CUBIERTA DEL RETORNO
1
PÁNEL SEPARADOR IZQUIERDO
1
PÁNEL SEPARADOR DERECHO
1
REPISA DESLIZABLE
1
SOPORTE DE METAL QUE MIDE 14"
1
PARA EL CAJÓN CL
SOPORTE DE METAL QUE MIDE 14"
1
PARA EL CAJÓN CR
SOPORTE DE METAL QUE MIDE 14"
1
PARA EL CAJÓN DL
SOPORTE DE METAL QUE MIDE 14"
1
PARA EL CAJÓN DR
TORNILLO CONF IRMAT
2
POSTE DE LEVA
20
5/8" AJUSTADOR DE LEVA
20
CLAVIJA
8
SOPORTES DE ESTANTE
4
6X1/2" TORNILLO PLANO ZINC
8
CAPUCHON ES P/TORNILLOS
2
"CONF IRMAT"
8X5/8" TORNILLO CON ARANDELA
16
MENSULA DE PLASTICO
4
PLACA METÁLICA
2
Resumen de contenidos para Mylex 43098
- Página 1 LADO DERECHO 754309803 DESK TOP CUBIERTA DEL ESCRITORIO 754309804 BOTTOM BASE 754309805 KICK PLATE PLACA DE SOPOR TE INFERIOR 43098 754309806 ADJUSTABLE SHELF REPISA AJUSTABLE 754309807 RETURN LEFT SIDE LADO IZQUIERDO DEL RETORNO 754309808 RETURN RIGHT SIDE LADO DERECHO DEL RETORNO...
- Página 2 INSERT CAM FASTENERS (53) INTO LEFT SIDE (1). ENSURE THE ARROW ON THE CAM FASTENER (53) IS POINTING TO THE HOLE OPENING AT THE EDGES OF THE LEFT SIDE (1). ATTACH CAM POSTS (52) TO THE LEFT SIDE (1) USING PRE-DRILLED HOLES AND A SCREWDRIVER.
- Página 3 INSERT CAM FASTENERS (53) INTO RIGHT SIDE (2). ENSURE THE ARROW ON THE CAM INSERT CAM FASTENERS (53) INTO RETURN LEFT SIDE (7). ENSURE THE ARROW ON FASTENER (53) IS POINTING TO THE HOLE OPENING AT THE EDGES OF THE RIGHT SIDE THE CAM FASTENER (53) IS POINTING TO THE HOLE OPENING AT THE EDGES OF THE (2).
- Página 4 INSERT CAM FASTENERS (53) INTO RETURN RIGHT SIDE (8). ENSURE THE ARROW ON THE CAM FASTENER (53) IS POINTING TO THE HOLE OPENING AT THE EDGES OF THE RETURN RIGHT SIDE (8). ATTACH CAM POSTS (52) TO THE RETURN RIGHT SIDE (8) USING PRE-DRILLED HOLES AND A SCREWDRIVER.
- Página 5 ATTACH THE KICK PLATE (5) TO THE LEFT SIDE (1) AND RIGHT SIDE (2) USING DOWELS (54). ATTACH LEFT SIDE (1) TO THE BOTTOM (4) CAM POSTS (52) AND CAM FASTENERS (53). ENSURE ALL CAM FASTENERS (53) ARE TIGHTENED WITH A SCREWDRIVER. ATTACH THE RIGHT SIDE (2) TO THE BOTTOM (4) USING CAM POSTS (52) AND CAM SUJETE LA PLACA DE SOPORTE INFERIOR (5) AL LADO IZQUIERDO (1) Y AL LADO FASTENERS (53).
- Página 6 ATTACH THE KICK PLATE (5) TO THE RETURN LEFT SIDE (7) AND RETURN RIGHT SIDE (8) USING DOWELS (54). ATTACH RETURN RIGHT SIDE (8) TO THE BOTTOM (4) USING CAM POSTS (52) AND CAM FASTENERS (53). ENSURE ALL CAM FASTENERS (53) ARE TIGHTENED WITH A ATTACH THE RETURN LEFT SIDE (7) TO THE BOTTOM (4) USING CAM POSTS (52) AND SCREWDRIVER.
- Página 7 ATTACH CAM POSTS (52) TO THE DESK TOP (3) USING PRE-DRILLED HOLES AND A SCREWDRIVER. ATTACH METAL PLATE (85) TO THE DESK TOP (3) USING PRE-MARKED HOLES, SCREWS (83) AND A SCREWDRIVER. ATTACH THE RETURN LEFT SIDE (7) TO THE RIGHT SIDE (2) USING CONFIRMAT SCREWS (51).
- Página 8 INSERT CAM FASTENERS (53) INTO LEFT MID POST (10). ENSURE THE ARROW ON THE CAM FASTENER (53) IS POINTING TO THE HOLE OPENING AT THE EDGES OF THE LEFT ATTACH 14” METAL SLIDE CL (13) ONTO THE LEFT MID POST (10) USING SCREW (57) MID POST (10).
- Página 9 INSERT CAM FASTENERS (53) INTO RIGHT MID POST (11). ENSURE THE ARROW ON THE ATTACH 14” METAL SLIDE CR (14) ONTO THE RIGHT MID POST (11) USING SCREW (57) CAM FASTENER (53) IS POINTING TO THE HOLE OPENING AT THE EDGES OF THE RIGHT AND PRE-MARKED HOLES.
- Página 10 **NOTE** THERE ARE NO PRE-MARKED HOLES FOR THIS STEP. ATTACH LEFT MID POST (10) TO THE DESK TOP (3) USING PLASTIC BRACKETS (84) AND ATTACH THE LEFT MID POST (10) TO THE DESK TOP (3) USING CAM POSTS (52) AND SCREWS (83).
- Página 11 ATTACH THE RIGHT MID POST (11) TO THE RETURN TOP (9) USING CAM POSTS (52) AND CAM FASTENERS (53). ENSURE ALL CAM FASTENERS (53) ARE TIGHTENED WITH A ATTACH CAM POSTS (52) TO THE RETURN TOP (9) USING PRE-DRILLED HOLES AND A SCREWDRIVER.
- Página 12 **NOTE** THERE ARE NO PRE-MARKED HOLES FOR THIS STEP. ATTACH THE DESK TOP (3) TO THE LEFT SIDE (1), RIGHT SIDE (2), AND RETURN LEFT ATTACH RIGHT MID POST (11) TO THE RETURN TOP (9) USING PLASTIC BRACKETS (84) SIDE (7) USING CAM POSTS (52) AND CAM FASTENERS (53). ENSURE ALL CAM AND SCREWS (83).
- Página 13 ATTACH THE RETURN TOP (9) TO THE RETURN RIGHT SIDE (8) USING CAM POSTS (52) AND CAM FASTENERS (53). ENSURE ALL CAM FASTENERS (53) ARE TIGHTENED WITH A SCREWDRIVER. INSERT SHELF SUPPORT (56) INTO HOLES IN THE DESK AT THE DESIRED POSITIONS FOR THE ADJUSTABLE SHELF (6).
- Página 14 ATTACH 14” METAL SLIDE DL (15) AND 14” METAL SLIDE DR (16) ONTO THE BOTTOM OF THE SLIDE OUT SHELF (12) USING SCREWS (57), PRE-MARKED HOLES AND A SCREWDRIVER. INSERT THE SLIDE OUT SHELF (12) INTO THE UNIT, AS SHOWN. FIJE LA GUÍA DE DESLIZAMIENTO DE 14"...