Chime doesn't sound:
• Make sure pushbutton and chime codes are the same (See pages 2 and 3).
• Check orientation of pushbutton battery (See page 3).
• Check charge of pushbutton and chime batteries, replace if necessary.
Batteries seem OK, but the chime doesn't work when installed:
• Don't mount chime or pushbutton on metal or near metal studs. This re-
duces the transmitter range. Use 1/4" to 1/2" (6 to 13 mm) wood shims to
move chime or pushbutton off metal surface.
• Concrete floors may reduce range. Move chime away from floor.
• Try locating chime closer to pushbutton.
The range of the wireless chime can vary with location, temperature and
battery condition.
If you experience a problem, follow this guide. You may also want to visit our Web
site at: www.desatech.com. If the problem persists, call* for assistance at 1-
800-858-8501, 7:30 AM to 4:30 PM CST (M-F). You may also write* to:
DESA Specialty Products™
P.O. Box 90004, Bowling Green, KY 42102-9004
ATTN: Technical Service Specialty Products
* If contacting Technical Service, please have the following information avail-
able: Model Number, Date of Purchase, and Place of Purchase.
No Service Parts Available for this Product
This device (SL-6150-RX, WB-94A-TX) complies with Part 15 of the FCC
Rules and RSS-210 of Industry Canada. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that
may cause undesired operation.
The user is cautioned that changes or modifications not expressly approved
by the party responsible for regulatory compliance could void the user's au-
thority to operate the equipment.
Troubleshooting
Technical Service
(Do Not Send Products)
Regulatory Information
-4-
595-5551-09