Technical Data; Safety Instructions - Infinite spa 7505541 Manual De Instrucciones

GB Manual for Multi-Colour LED Light for Infinite®Spa
This battery powered multi-colour LED light is designed for exclusive use as an underwater light in your Infinite® Spa. The required AAA batteries are not
included. Please read the instruction manual carefully before using the LED light and keep it in a safe place.
Components:
1 LED Light for Infinite® Spa
1 screw cap with 2 O-rings (battery housing)
1 holder for 3 AAA batteries

Technical data

Dimensions (H x W x D)
Number of LEDs
Type of LED
Rated power
Rated voltage
Rated current
Colour modes (programmed)
Lumen
Energy saving
Number of batteries
Battery size
Battery types (recommended)
Battery capacity

SAFETY INSTRUCTIONS

- Observe all warnings and instructions given in this manual. Failure to do so may result in personal injury or property damage.
- The LED light is suitable for Infinite®Spa with a water temperature of min. 10°C to max. 40°C.
- The batteries must not be replaced if there are persons in the Infinite® Spa.
- Do not look directly into the light emitted by the LED light.
- Charge rechargeable batteries only under the permissible conditions.
- Do not sit, lie on or climb on the LED light.
- Keep small parts and packaging materials away from children. Danger of suffocation!
- Remove the batteries if the device is not going to be used for an extended period of time.
- Dry the device before inserting the battery. Always replace all 3 batteries at once. Do not mix old with new batteries or different types of batteries.
- Always use the appropriate battery size and type. Make sure that the batteries are inserted according to their polarity (+/-).
- This LED light can be used by children from the age of 8 and persons with limited physical, sensory or mental abilities, lack of experience and knowledge
if they are supervised or instructed in the safe handling of the device and understand the dangers involved. Children should not be allowed to play with the
device. The cleaning and maintenance procedures carried out by the user may only be carried out by children who are being supervised.
Inserting or replacing batteries
Note:
This product is powered by 3 AAA batteries (not included).
We recommend using non-rechargeable alkaline batteries (LR03) or rechargeable NiMH batteries (HR03).
1. Dry the LED light completely.
2. Unscrew the battery case lock (see Figure 1). Be sure not to lose the two O-rings from the screw cap.
3. Pull the battery holder out of the battery case and insert three AAA batteries as marked on the battery holder (see Figures 2 and 3).
Manual LED Light Infinite Spa 2020 ES.indd 10 Manual LED Light Infinite Spa 2020 ES.indd 10
63 x 116 x 116 mm
12 SMD
Multicolour RGB
DC 0.9 W
4.5 V
205 mA
cold white/green/blue-green/blue/purple
white 84-96/green 60-72/blue-green 38-48/blue 18-24/purple 24-36
after 2 hours the device switches off automatically
3 (not included)
AAA
Non-rechargeable alkaline battery 1.5 V (LR03)
Rechargeable NiMH battery 1.2 V (HR03)
min. 1000-1200 mAh
21.11.19 08:11 21.11.19 08:11