Kenmore 255.99279 Manual De Uso Y Cuidado página 5

wine chiller
wine wine chiller.
wine chiller
1
Temperature Adjustment
: Press this pad once and the temperature will increase 1° F/C.
: Press this pad once and the temperature will decrease 1° F/C.
The wine chiller can be operated by adjusting the temperature control buttons (up arrow
and down arrow) to various settings.
The new desired temperature will flash on the display for a few seconds and then switch
back to the actual temperature which will gradually change until setpoint is reached.
The temperature range MIN and MAX is 41° - 65°F (5° - 18°C),
LED light pad; press to turn light on or off.
POWER On/Off: Press this pad to power the unit on or off.
Press and POWER together for 2 seconds to convert between Fahrenheit
temperature and Celsius temperature.
Failure Codes
If "E" and "F" display, contact Sears or another qualified service center for unit repair.
If the temperature in the chiller is too low, it will display "L".
control to a warmer setting.
If the temperature in the chiller is too high, the control will flash "H", and an alarm will sound
for 30 seconds. One minute later, the alarm will continue to sound for another 30 seconds.
After three times, the alarm will not sound any more. You can press any key to cancel the sound
alarm.
Storing too many cans or bottles in the chiller may cause the temperature in the chiller to
rise temporarily.
,
wine
Adjust the temperature
chiller
closed to preserve compartment coolness for as long as possible. After a prolonged power outage,
you should clean the inside of the chiller compartment before reuse.
remove wine bottles
keep it in a vertical position.
chiller
chiller
Keep the wine chiller door
chiller turn
If moving the wine chiller, always