Ratio PRO XF2350 Manual De Instrucciones página 39

8
6
9
Press in the spindle lock button and rotate
the spindle by hand until it is locked (see C2).
Keeping the lock button pressed in, tighten the
outer flange with the spanner provided.
6. SAFETY ON / OFF SWITCH (SEE D)
Your switch is locked off to prevent accidental
starting. Depress the lock-off button(yellow
arrow) then the on/off switch(white arrow) and
C1
C2
release the lock-off button. Your switch is now
on. To switch off, just release the on/off switch.
7. TO USE THE GRINDER (SEE E)
Attention: Do not switch the grinder on whilst
the disc is in contact with the workpiece.
Allow the disc to reach full speed before
starting to grind.
Hold your angle grinder with one hand on the
main handle and other hand firmly around the
auxiliary handle.
Always position the guard so that as much of the
exposed disc as possible is pointing away from
you.
Be prepared for a stream of sparks when the disc
touches the metal.
For best tool control, material removal and
minimum overloading, maintain an angle
between the disc and work surface of
approximately 150 -300 when grinding.
Use caution when working into corners as
contact with the intersecting surface may cause
the grinder to jump or twist.
When grinding is complete allow the workpiece
to cool. Do not touch the hot surface.
8. CUTTING
Warning! For cutting metal, always work
with the wheel guard for cutting(12).
When cutting, do not press, tilt or oscillate the
machine. Work with moderate feed, adapted to
the material being cut.
Do not reduce the speed of running down cutting
discs by applying sideward pressure.
D
15°-30°
E
39