Cleaning And Maintenance - Hkoenig JOE32 Manual De Utilización

OPERATING INSTRUCTIONS:
a) Ensure voltage used corresponds with the voltage indicated.
b) Turn the speed control to selected speeds:0(off) and speeds1,2,3 is Slow, Middle, Fast.
c) Tilting angles-By pushing the tilt-guard, you can adjust the fan to any elevation preferred.
d) Never touch the blades with hand or any object!
e) Do not pull the cord too hard. If damaged after pro-long use, get it repaired by any electrical
repairman.
f) To clean: Disconnect the power cord from the mains. Remove the guard and the blades carefully.
Do not drop the blades! First use soft cloth with light soap to clean off oil stains. Then wipe and
polish with dry cloth. Never use polish or any corrosive liquid that will damage the paint, metal or
plastic! Put back the blades and lock the guard securely before use.
g) To mount on walls, ensure strong, durable tools are used. Make sure it is properly and firmly
drilled into the wall to support the weight of the fan.
NO exchange will be entertained if the above instructions are not followed. Always Test the product
first before purchase.

CLEANING AND MAINTENANCE:

• To clean: Unplug the power cord, remove the protector
and blades carefully, do not drop the blades, use a soft
cloth with mild soap first to remove oil stains, then wipe
and polish with a dry cloth, never using polish or
corrosive
liquids that could damage the paint, metal or plastic,
replace the blades and close the guard in place before
use.
• Do not use abrasive cleaning chemicals or detergents
that could easily damage or deform your device.
ENVIRONMENT
CAUTION: Do not dispose of this product as it has with other household products. There is a separation of this
waste product into communities, you will need to inform your local authorities about the places where
you can return this product. In fact, electrical and electronic products contain hazardous substances that
have harmful effects on the environment or human health and should be recycled. The symbol here
indicates that electrical and electronic equipment should be chosen carefully, a wheeled waste container is
marked with a cross.
Adeva SAS / H.Koenig Europe - 8 rue Marc Seguin, 77290 Mitry-Mory, France
www.hkoenig.com - [email protected] - [email protected] - Tél: +33 1 64 67 00 05