Ultimaker S5 Guia De Inicio Rapido página 6

Install the Ultimaker S5
When placing the printer on a shelf or table,
take proper measures to prevent the printer
from falling.
1. Unpack the Ultimaker
S5 and remove all
accessories from
inside the printer
4. Fit the print head cable
clips onto Bowden tube
2 and divide equally
2. Remove the clamp
clips from the print
head and insert the
Bowden tubes
5. Insert the spool holder
into the back panel
and push until it snaps
into place
The Ultimaker S5 should be lifted by at
least two people during installation.
3. Secure the Bowden
tubes with the
clamp clips
6. Connect the spool
holder cable to the
NFC socket and secure
behind the cable clips