Makita PDC1200 Manual De Instrucciones página 12

6. Install the adapters to the tool or machine in the
same way as the battery cartridge.
1
Fig.22
► 1. Adapter
NOTICE:
For 36 V (18 V x 2) battery-powered
tool or machine, use the adapters for 36 V (18
V x 2). For 36 V - 40 Vmax battery-powered tool
or machine, use the adapter for 36 V - 40 Vmax.
For direct connection type tool or machine, no
adapter is required.
NOTICE:
When installing adapters to the tool or
machine, be sure to install the adapter equipped
with 2 cords to the location shown in the figure.
If you install the adapters incorrectly, the adapter
equipped with 2 cords cannot be inserted all the
way. In this case, do not insert the adapter forci-
bly. Otherwise, the tool or machine may be damaged.
Fig.23
► 1. Adapter with 2 cords
Fig.24
► 1. Adapter with 2 cords
NOTE: The direction of the cord of the adapter can be
changed in the range of approximately 180 degrees.
12 ENGLISH
1
1