Techinical information
Input voltage range:
Output power:
Standby current draw: < 0.03W
Certifications:
Waterproof rating: IPX6 front and back
Tools Required
Pozi Screwdriver
1
Measure mounting surface. If surface
is more than 3mm thick, route a pocket
67mm (2.6") diameter till 3mm thickness
is achieved.
3
Option 1 - CNC
etch logo onto top
surface
4
Option 2 - Use
vinyl sticker and
align with magnet
tool provided.
Ensure surface is
free from dirt
or grease.
12/24V
5W (5V 1A)
Qi, CE, FCC, ROHS
Straight Router
2
For further installation infomation please visit
Parts List
Locking
Ring
Charging
Puk
Sika ex 292-i
(recommended)
Screw or bond locking ring in correct orientation
to underside of surface according to the
measured material thickness (Sika ex 292-i
recommended).
www.scanstrut.com/rokk-wireless
Magnet
Installation
Tool
x1
Vinyl Sticker
No6 x 1/2"
x1
self tapping screw
Alcohol Wipe
3-9mm
9-18mm
>18mm
5
Screw in PUK until
rm, do not over
tighten.
6
Connect wires to
12/24V supply,
ensuring a
waterproof
conenction.
x1
x1
x3
x1
