Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
II. Tools Required
• Wrench:
9/16", 17mm
III. Installation
1. Remove the metal wear bar from the front of
the plow, with the use of a 9/16", or 17mm
wrench.
2.
Install the UHMW wear bar, attach with the
supplied hardwear, and torque down to 18 ft-lbs.
Note: UHMW will be black. Lighter color shown for photo only.
UHMW Wear Bar installation is now complete and
should look like figure 2.
Warn Industries Inc.
INSTALLATION INSTRUCTIONS
ATV Plow Wear Bar UHMV 50" 54" 60"
Part Number: 80860, 67861, 67862
Application: ATV Snow Plow
Figure 1.
Figure 2.
I. Parts List
Ref
Part #
Description
1
*
UHMW Wear Bar
2
69807
Nut Lock M10x1.5
3
81707
M10x1.5x40 Carriage Bolt
* Indicates Part Number 80860, 67861, 67862
** Indicates For 60" Plow Only
PAGE 1
Qty
1
7~9**
7~9**
67863 Rev A2
Manuales relacionados para Warn 80860
Resumen de contenidos para Warn 80860
- Página 1 7~9** 1. Remove the metal wear bar from the front of the plow, with the use of a 9/16”, or 17mm * Indicates Part Number 80860, 67861, 67862 ** Indicates For 60” Plow Only wrench. Install the UHMW wear bar, attach with the supplied hardwear, and torque down to 18 ft-lbs.
- Página 2 81707 Boulon de carrosserie M10 x 1,5x40 7~9** 1. Démonter la barre d’usure métallique de l’avant du chasse-neige, au moyen d’une clé de 9/16 po. ou * Indique les références 80860, 67861, 67862 17 mm. ** Indique uniquement pour le chasse-neige de 60 po.
- Página 3 1. Retire la barra de desgaste metálica de la parte delantera de la pala usando una llave de 9/16 pulg. * Indica el número de referencia 80860, 67861, 67862 o 17 mm. ** Indica solo la pala de 60 pulg.