Connections; Control Unit - FAA EDC 01L Manual Del Usuario

• CONNECTIONS

Signalling
LEDs

Control unit:

The power supply of the device can vary from 11 to 15 V and must be continuo-
us. The power supply voltage is taken directly to the SPInet bus for powering
the FAAC badge readers.
!
WARNING !!
Use a short-circuit protected power supply, max 3A or with a max 3A fuse.
Do not connect batteries without suitable fuses or protective devices, Max 3A.
The Door Controller unit is protected against reverse polarity.
Door Controller
Programming
Button
17
Translation of the original instructions
EN
 1
532226 - Rev.D