Polk Audio SB 5500 Manual Del Usuario página 8

BLUETOOTH ® WIRELESS TECHNOLOGY
To use your Bluetooth wireless technology device
with the SoundBar5500, you must first pair your
device with your SoundBar.
Pairing creates the ability of your Bluetooth device to connect
with your SoundBar wirelessly. Pairing is like a handshake
between your Bluetooth device and your SoundBar5500
in which they meet and exchange information.
You only have to pair your SoundBar with your Bluetooth device
one time for this exchange of information to take place. After that
you simply select the "polk soundbar" from your
device list to make the connection to your SoundBar.
The SoundBar can hold 8 Bluetooth devices in its memory.
If enough devices pair after yours, your device could
be dropped from the memory list.
Pair and connect your Bluetooth device
with the SoundBar:
1. Make sure your Bluetooth device and SoundBar5500
are both powered on.
2. Activate the Bluetooth function on your Bluetooth source
device. See your device's manual for instructions.
3. Press the Bluetooth source button from the SoundBar
remote or press the SOURCE button on the SoundBar
until the Bluetooth source is selected.
LEARN SOURCE
The Bluetooth symbol will illuminate, then begin slowly
pulsing as it looks for the paired device.
4. Your SoundBar will now be displayed on your source
device and available to pair and/or connect. Select the
"polk soundbar" on your device to initiate
the connection process.
5. After a short delay (5 seconds), the two devices should
now be connected. You should hear a short tone and
the Bluetooth source symbol will now be steady blue.
6. Play your music from your device!
Note: If your device asks for a passcode to pair to the SoundBar,
enter "0000."
8 Polk Audio Customer Service 800-377-7655 (Outside USA & Canada: 410-358-3600)
OR
How to disconnect with a Bluetooth device:
1. Press and release the Remote Control Bluetooth button, or
2. Press and release the Bluetooth Source button, or
3. Turn off or disconnect the Bluetooth feature
on your Bluetooth device.
The SoundBar will emit a short tone and the
Bluetooth source symbol will begin slowly pulsing
when disconnected.
Automatic connection:
Any time you want to connect the last paired device
and play it through the SoundBar, do the following:
1. Turn your device's Bluetooth function on.
2. Enter Bluetooth source by pressing the Bluetooth source
button from the remote or press the SOURCE button
on the SoundBar until the Bluetooth source is selected.
3. After a short delay, the two devices will automatically
connect, you will hear a short tone, and the Bluetooth
source symbol will now be steady blue.
Note: By default, the last connected Bluetooth device
will automatically connect if available.
Pair and/or connect to a device when in Bluetooth
source, but disconnected:
1. Engage the Bluetooth function on your Bluetooth source
device. See your device's manual for instructions.
a. The SoundBar will be displayed on your source
device as available to pair and connect. Select
the "polk soundbar" on your device to initiate
the pairing and connection process.
After a short delay, the two devices should now be paired
and connected. You should hear a short tone and the
Bluetooth source symbol will now be steady blue.
How to disconnect:
Note: Anytime The SoundBar exits SLEEP mode and is in
Bluetooth source, the SoundBar will automatically connect
to the last paired Bluetooth device if the paired device's
Bluetooth feature is on.