Using Your Coffee Maker - Telstar TCF006910CT Manual De Instrucciones

Coffee Maker
TCF006910CT
BEFORE FIRST USE
Check that all accessories are complete and the unit is not damaged. Add water into water tank to the max
level and brew water for several times without coffee powder, then discard the water. Clean all detachable
parts thoroughly with warm water.

USING YOUR COFFEE MAKER

1. Open the top lid and fill the water tank with drinking water. The water level should not exceed MAX level
marked inside the tank.
2. Place the funnel on the water tank and make sure the funnel is assembled correctly. Then put the filter
correctly.
3. Add coffee powder into filter. Usually a cup of coffee need a level spoon of coffee powder, but you may
adjust according to personal taste. Then close the top lid.
4. Insert the carafe on keeping warm plate horizontally.
5. Plug the power cord into the outlet..
6. Press switch button the indicator in it will be illuminated red. The appliance will begin working.
7. The brewing process can be interrupted by pressing the switch button twice again at any time.
Note: You can take out carafe, pour and serve at any time. The appliance will stop dripping automatically. But
the time cannot exceed 30 seconds.
8. Remove out carafe to serve when finish brewing (about one minute later after the coffee stops dripping
out.)
Note: the coffee you get will less than the water you have added, as some water is absorbed by coffee
ground.
9. When the process is finished, if you do not want to serve immediately, keep the coffee maker is energized,
the coffee can be kept warm in the keeping warm plate. The appliance will be kept warm automatically all
the time if it has not been manually disconnected at the completion of brewing. For an optimum coffee taste,
serve it just after brewing.
10. Always turn the coffee maker off and disconnect the power supply when not use.
Note: pay attention to pour the coffee out, otherwise you may be hurt as the temperature of coffee just
finished is high.
9