Williams Sound BAT KT7 Guia De Inicio Rapido página 4

Setup and Operating Instructions
1. Make sure you have the correct adapter for the
country of use.
2. Open the battery compartment and insert two AAA
NiMH batteries. Be sure to follow correct polarity.
3. Set the battery switch (located inside the battery
compartment) to the NiMH position.
4. Plug the USB A Plug into the USB A Port on the
power supply.
5. Plug the USB Micro-B connector into the charging
port on the PockeTalker (Figure 1).
6. Plug the power supply (with correct international
adapter, where necessary) into an AC wall outlet. An
indicator light on the power supply will illuminate to
indicate the power supply has AC power.
7. The charging indicator on the PockeTalker will blink
slowly while the batteries are being charged, then
stay on when the batteries are fully charged.
8. It will take approximately 16 hours to fully charge the
batteries .
BAT KT7, BAT KT8 Charger for Pocketalker 2.0