Idiomas disponibles
Idiomas disponibles
Technical Data:
Battery: Lithium-Ion 3.7V DC, 2600mA
LED: 10pcs 0.5W SMD LED
Brightness : 1st level : 900 Lux @ 0,5 meters, 400 lumens
2nd level : 450 Lux @ 0,5 meters, 200 lumens
Run time: 1st level : 3H
2nd level : 6H
Time Of Charging: Approximately 5 hours
Dimensions: 23.6 X 32 X 262 mm
Weight: 180 g
IP rating: IP42(with the protective cap)
Main features:
A. Special design optical lens offering 90 degree fl ood light
B. Micro USB charging system, convenient charging with your mobile phone charger or
computer
C. Slim size design
Instructions for use:
1. Switch off the lamp before connecting to the charger.
2. Connect the charger to main electricity. The indicator on lamp will show red if the connect
to main electricity is right.
3. The indicator on lamp will turn red indicating charging begins
4. The indicator on lamp will turn green indicating charging completed.
Caution:
1. Fully recharge the lamp until indicator turn into green recommend waiting 30 minutes
before fi rst use
2. Avoid looking directly into the beam.
3. Switch off the lamp when not in use
4. If lamp will be stored for one month or more, please fully charge it prior to storage.
5. Do not use the lamp near open fl ames
Recommend charger:
Connector: micro USB connector
Voltage: 5V DC
Current: MIN: 300mA, MAX: 1A
Power Connection:
Verify that the voltage of the battery charger corresponds to that of the system. Use the lamp
within places prescribed and governed by current regulations on workplaces and electrical
systems. Check that the plug fi t's on the cable is suitable for the work environment, if it is not,
it must be replaced.
Advice for cleaning and care:
The surface of the Berner lamps is made of high grade synthetic material. Please don't use
corrosive or aggressive cleaner, these may damage the surface.
(
G
) B
