Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Parts:
Jar
50 oz.
Capacity
Blender Jar assembly is as follows:
1. Turn the Blending Jar upside down and place on a flat surface. Add the Blade to the Base
and top with the Rubber Gasket.
2. Insert Blade Assembly with the Gasket between the Glass and the Blade. Turn the Base
clockwise until it is tightly secured.
3. Turn the assembled jar right side up. You may choose to add water to make sure it does
not have leakage.
Using Your Blender:
WARNING: Avoid contact with moving parts.
1. Place the Motor Base on a clean, flat surface. Fill your Glass Jar with your favorite
ingredients; do not fill past the Max line.
CAUTION: Add liquids first and do not overfill the product or operate it when empty.
2. Insert the Glass Jar to the Motor Base turn until the slots lock in place. Add the lid with the
Filler Cap in place.
3. Connect Plug to the nearest 120 V AC electrical outlet. Pulse your beverage to the
consistency and speed of your preference.
Note: Push the Hi/Low Button for Speeds 1-6, and leave the button out for High Speeds 7-12
Attention: First use may cause a slight odor or small smoking upon heating, it is normal. This is
a result of the heating element chemical reaction. It quickly goes away.
Lid & Filler Cap
Blade Assembly
-Blade
-Gasket
-Base
12 Speeds
(Off/ Pulse Button)
( Hi/Lo Button )
4
Tabla de contenido
