LG LDF8812ST Manual Del Propietário página 14

U U
S S I I N N G G Y Y O O U U R R D D I I S S H H W W A A S S H H E E R R
Adding Rinse Aid to dispenser
The use of rinse aid is required to prevent possible
spots on dishes water droplets remaning after the
completion of the wash cycle and to enhance the
performance of the dry cycle.
NOTE
Only liquid rinse aid can be used for this dishwasher.
�Filling Rinse Aid
1. Rotate the round cap counterclockwise and
remove it.
2. Add a liquid rinse aid to the maximum level.
(Max. 4.8 oz (145ml))
3. Replace and lock the cap.
4. Rinse aid will be automatically dispensed during
the final rinse cycle.
14
�Rinse Aid Amount Setting
The factory setting is at level 3, which is where you
can expect the best performance under most
conditions. Setting the rinse aid control to a setting
that is too low will contribute to spotting and
streaking of the dishes and poor drying performance.
Setting the control too high can cause foaming which
will cause poor wash performace or failure.
1. Remove the cap.
2. Rotate adjuster to the desired setting.
� � Refilling Rinse Aid
4.8 oz (145ml) is the capacity of the rinse aid
dispenser. How often you need to refill the rinse aid
dispenser depends on your washing habits such as
the number of washes per month and which rinse
aid setting you use. The indicator light will inform you
when the rinse aid level is low. The indicator light will
stay on when you close the door to start a cycle.
NOTE
When the
indicates the rinse aid reservoir
is almost empty.
lamp is on, it