Idiomas disponibles
Idiomas disponibles
●Under the menu settings, press OK to save the settings. In the video
or photo interface, press OK to take photos and record videos.
●Switch to ON for monitoring mode: each function output will be executed
when the switch is pushed to the ON position in each mode of photo, video,
video + photo.
●Switch to "OFF" to shut down state, the LCD can not display anything.
2. Camera mode
●The camera has three modes: Photo mode, Video mode, Photo + Video mode
●Photo mode:
●The photo resolution settings, there are 20mp, 16mp, 12MP, 8mp, 5MP,
3MP and 1mp. The larger the size is, the higher the image resolution is,
the fewer photos can be stored by the memory card
●Video mode:
●The video resolution settings: 3840*2160P, 2688*1520P, 1920*1080P,
1280*720P, 720*480P, 640*480P. The video size increases with increase of
the video resolution, leading to shorter video storage time. Likewise,
the video size decreases with decrease of the video resolution, leading
to longer video storage time.
●Photo + video mode: In on mode, the machine takes pictures and then
records videos.
Note: In order to save power, the screen will be automatically turn off
during the recording process.
3. Take continuous photos
●One, two and three continuous photo taking functions can be selected
4. Video length
●Set the length of the video (3-59 seconds or 1-5 minutes). The longer
the recording time is selected, the less the remaining recording time is.
The system presets the video length is 5 seconds.
5. Voice recording
●You can choose to turn it on or off, the video has sound when it is on,
and the video has no sound when it is off.
6. Motion induction delay
●Set PIR sleep time (5-59 seconds or 1-60 minutes). The longer the time
is, the less the shooting time will be. The PIR does not work during sleep,
which can prevent the memory card from storing too many files and occupying
the memory capacity.
7. Side PIR sensors
● You can choose to turn it on or off. If you choose on the range will
get wider. When turned off, the side PIR sensors will turn off.
