Step 4: Configure the base for your desk phone
Once the base has established a connection to the
desk phone, the optimal clear dial-tone switch and
microphone level settings need to be determined.
The wizard will prompt you to call your local
Jabra setup server — see the cover of this
quick start guide for a list of numbers. This
enables the Jabra GO base to test its clear
dial-tone switch and mic.-level settings by
exchanging signals with the setup server.
Note: If the base is unable to contact the server,
you can choose to configure the desk phone
manually. See the user manual for more.
To set the clear dial-tone switch position and mic.-
level:
1. The touchscreen wizard prompts you to call
the Jabra setup server. Follow the on-screen
instructions.
There is no clear dial-tone switch accessible to the
user on the base — stepping through positions
A – G to find the best one occurs automatically.
Equally, the base will determine the optimal
microphone level automatically.
Step 5: Connect the base to your softphone (pC)
To use Jabra GO with a softphone, you must first
connect the Jabra GO base to your PC via a USB cable.
The softphone part of the setup wizard will prompt
you to do this.
US
1. Connect the small connector (mini USB) of the
supplied USB cable to the port marked
Jabra GO base.
2. Connect the other end of the USB cable to any free
USB port on your computer.
Step 6: enable your softphone interface
1. Insert the CD-ROM included with your headset into
your PC and install the Jabra PC Suite software.
The softphone part of the setup wizard will prompt
you to do this.
The installation includes the supported softphone
drivers necessary to enable the softphone interface.
If you have any questions as you work through the
setup wizard, or if you would like to learn more
on how to use the many advanced features of
your headset solution, please refer to the full user
manual. This is included on the CD-ROM in PDF
format.
2. Right-click on the Jabra icon in the Windows
Notification Area and select open Device Service.
The Jabra Device Service window opens. This
shows the list of softphone drivers installed on your
PC. Use the online help available in this window to
learn more.
3. Select the softphone you want to use (target
softphone) from those available in the Select
softphone for outgoing calls drop-down list.
on the