Xoro HTC 1526D Manual De Operación página 81

Connection
Power connection
Connect the AC/DC power adapter with the DC IN input of the HTC TV
set. After than, please connect the power cable with the wall mounted
power outlet.
On the front side you can see a red LED light. The HTC TV set is now
in Stand-By mode. By pressing the POWER button on the remote con-
trol or on the top side of the device the red LED changes to a green
light.
Antenna
The HTC TV set has an analogue and a digital TV Tuner inside. For
receiving analogue TV signals please connect the antenna cable with
the RF connector on the HTC TV set and with the VHF/UHF roof an-
tenna or with a CATV antenna plug.
For receiving digital terrestrial TV signals please connect the HTC TV
set with the RF plug and also with the roof antenna. If no roof antenna is
available, please use indoor aerial.
For activating the analogue TV Tuner, please switch with the SOURCE
button and choose in the popup window „TV" or "DTV" for digital terrestrial
TV.
Note:
For getting the best DVB-T reception please uses the roof antenna. If not
possible, than you can connect the HTC TV set with an
active indoor aerial.
SCART Input
Audio– and Video signals from a VCR or a setop box can
be transmitted by SCART. Please connect a SCART
cable with the SCART input on the HTC TV set and with
the SCART output on the VCR or setop box.
Press the SOURCE button and choose „SCART" in the
popup window and the SCART interface is activated.
HDMI
If you want connect a multimedia device with HDMI like a
game console „PS3" or a setop box with the HTC TV set,
you can establish a HDMI connection. Please con-
nect the HDMI cable on the HDMI interface on the
HTC TV set and the HDMI output of the multimedia
device.
Please press the SOURCE button and choose
„HDMI" in the popup window and the HDMI input is
active.
19