Linn Products CLASSIK MOVIE Manual Del Usuario página 5

Classik Movie System
If your TV/display device accepts a YPrPb/YUV (Component) signal and you
have connected your Classik Movie System to your TV/display device
accordingly, set to YUV.
If your TV/display device accepts an S-video signal and you have connected your
Classik Movie System to your TV/display device accordingly, set to S-VIDEO.
If your TV/display device does not accept an S-video, RGB or YPrPb/YUV signal,
set to COMPOSITE.
The output video signal can also be selected using the FORMAT button on the
front panel.
To do this:
• Repeatedly press or hold SOURCE +/SOURCE – on the front panel until
the display shows LISTEN DISC, or press DVD on the handset.
• Repeatedly press the FORMAT button to select the required display
device format type (either PAL, NTSC or automatic operation).
• With the required display device format showing on the front panel display,
press and hold the FORMAT button until the display changes to show one
of the video signal types.
• Repeatedly press the FORMAT button to select the required video signal
for your display device.
• Wait a few seconds for the display to change to the current source display.
Page 21
To stop playback and remove a disc:
NOTE:
If pressing / does not cause the disc drawer to open, press and hold
Page 36
Centre speaker trim adjustment
If you use a centre speaker as part of your AV/hi-fi system, you may find that
when watching a DVD or listening to a CD (see Surround sound modes in
Playing Discs chapter) you want to adjust the volume level of the centre speaker
without affecting any of the other speakers. This is done by adjusting the centre
speaker trim.
The centre speaker trim range is from -10 to +10, with neutral trim being 0.
To adjust the level of centre speaker trim:
4
Linn Products Ltd
/ .