English; Charging The Shaver - Braun Flex Integral 5414 Manual De Instrucciones

English

+35°C
+15°C
8
Our products are designed to meet the highest
standards of quality, functionality and design. We
hope you entirely enjoy your new Braun shaver.
Caution
• Do not use the shaver near, or over, basins filled with
water (e. g. bath tubs, showers etc.).
• For safety reasons, periodically check the cord for
damage and replace it, if it is loose in the shaver
socket.
1 Description
1
Foil protection cap
2
Triple shaving frame
3
Duo cutter block
4
Pop-out long hair trimmer
5
Switch lock
6
On/off switch
7
Charging light (green)
8
Low-charge light (red) (only 5416/5415)
9
Shaver socket
j
Switch for locking the swivel head («head lock»)
and for activating the pop-out long hair trimmer
(«trimmer»)
q
Release button

2 Charging the shaver

• For the 3 first chargings: Connect the shaver to the
mains and charge it for at least 4 hours (switch
position «off»), then shave without the cord until the
red low-charge light lights up.
(Model 5414: Shave without the cord until the shaver
runs distinctly slower.)
The full capacity is only reached after several
charge/discharge cycles.
• Subsequent charges will take approximately 1 hour.
• Wattage: 5 Watts
Voltage range during charging: 12–240 V Q /
50 or 60 Hz (automatic adaption)
Best environmental temperature range for charging:
15 °C to 35 °C