Valve module
Function vacuum valve
Function blow-off valve
Supply voltage
Power
Response time
Electrical connection
Air consumption blow-off/release
Manual override
Material, valves
Vacuum sensor
Response time
Supply voltage
Current consumtion
Electrical connection
Analog output
OUTPUT:
- Max. supply voltage
- Max. load current
- Residual voltage
Material, vacuum sensor
Values specified are tested at:
Room temperature (20⁰C [68⁰F] ± 3⁰C [5.5⁰F]).
Standard atmosphere (101.3 [29.9 inHg] ± 1.0 kPa [0.3 inHg]).
Relative humidity 35-85%, no condensation.
Compressed air quality, DIN ISO 8573-1 class 4.
Normally closed (NC)
Normally closed (NC)
24 V DC ±10%
3.5 W (15 ms), 0.3 W PWM holding
Supplied cables 300mm, Red (+) Black (-)
0-1.01 Nl/s at 6 bar [0-2.14 scfm at 87 psi]
Yes, non-locking push style
PA, NBR, FKM, SS
12-24 V DC ± 10%, Ripple P-P ≤ 10%
≤ 40 mA (with no load)
JST PAP-05V, supplied cable 2000mm
Output voltage:
Output impedance:
NPN open collector 2
outputs
30 V DC
PA, PC, epoxy glass
≤ 3 ms
≤ 2.5 ms
1-5 V ±2.5% of F. S.
1 kΩ
PNP open collector 2
outputs
24 V DC
125 mA
≤ 1.5 V
19
