described below) without coffee or a coffee filter.
OPERATING INSTRUCTIONS
1. Place the appliance on a hard, flat surface and connect it to the electricity
supply.
2. Open the top cover and pour cold water (preferably bottled or filtered water)
into the water chamber. The water level indicator shows the number of cups of
coffee. Do not exceed the maximum fill level (12 cups). We do not recommend
making fewer than four cups of coffee.
3. Place the carafe with the lid closed in the coffee maker, making sure it is fully in
place to activate the PAUSE & SERVE function.
CAUTION: If the carafe is not positioned properly on the warming plate, hot
water or hot coffee could spill over.
4. With the top cover fully open, insert the filter basket (or coffee filtering paper)
into the funnel.
5. Add coffee using the measuring scoop provided. Use the same coffee: water
ratio you use when you prepare ground coffee.
6. Clo
se the top cover and ensure it is closed securely.
7. Then:
Make coffee immediately
• Press the ON/OFF button to immediately begin brewing coffee. The red LED
light will flash to indicate the brewing cycle is taking place. The LCD display will
read "ON" in the top right-hand corner alongside the coffee cup icon.
• If you want to stop the appliance during the brewing cycle, press the ON/OFF
button again.
Pre-set the auto-brew time
• You can pre-set the auto-brew time using the PROG function. First, set the
current time. When plugged in, the coffee maker will show "00:00" by default.
Use the HOUR and MIN buttons to set the current time.
• Set the desired auto-brew time. Press the PRO button once. The display will
show "PROGRAM". Set the desired start time using the HOUR and MIN
buttons.
• The appliance will now be in auto-brew mode. A green light will come on and
the display will show "AUTO", the current time. Your coffee maker will
automatically begin brewing at the pre-set time. When the brew cycle begins,
the red light will flash to indicate the coffee maker is in operation and the
green light will turn off.
• Press the PRO button for about three seconds to cancel the auto-brew setting.
CAUTION: Never open the top cover during the brewing cycle even if no water
is draining from the funnel. Extremely hot water/coffee can spill out from the
filter basket and cause injury. If water/coffee is not draining from the filter
basket, IMMEDIATELY unplug the appliance and wait 10 minutes before
opening the top cover and checking the filter.
NOTE: This appliance has a PAUSE & SERVE function that allows you to pour a
cup of coffee at any time before the brewing cycle is complete. If activated, the
appliance will stop dripping automatically but for no longer than 30 seconds.
GB-06
GB