Tabla de contenido
Idiomas disponibles
Idiomas disponibles
m
NOTE: To reduce the risk of
fire,
use
only metal
ductwork.
1. Decide where the ductwork will run between the hood
and the outside.
2. A straight, short duct run will allow the hood to perform
most efficiently.
3. Long duct runs, elbows, and transitions will reduce
the performance of the hood. Use as few of them as
possible. Larger ducting may be required for best
performance with longer duct runs.
4. Install a roof or wall cap. Connect round metal
ductwork to cap and work back towards hood
location. Use duct tape to seal the joints between
ductwork sections.
ROOF CAP
,\
6"
ROUND
DUCT
DECORATIVE
WALL
FLUE
_
CAP
HOOD
24" TO 30" ABOVE
COOKING
SURFACE
6"
ROUND
ELBOW
1. Construct wood wall framing that is flush with interior
surface of wall studs.
Make sure:
a) the framing is centered over installation location.
b) the height of the framing will allow the mounting
bracket to be secured to the framing within the
dimensions
shown.
2. After wall surface is finished
secure mounting
bracket to framing using dimensions shown.
NOTE:
On 8' ceilings,
the hood distance
above cook top is
minimum 24", maximum 27".
On 9' ceilings,
the hood distance
above cook top is
minimum 28", maximum 30".
FRAMING
BEHIND
DRYWALL
/
36=3/4"=
bottom
of hood
24" above
eooktop
42=3/4"=
bottom
of hood
30"
above
eooktop
C3
O
::3
::3
m
7
Tabla de contenido
