Wall Mount; Maintenance; Specifications - Oregon Scientific BA113 Manual Del Usuario

WALL MOUNT

On the back of the Barometer you'll find one recess hole.
Place once screw ( or whatever device you choose ) into
the wall until the head extends a little more than 4 mm
from the wall. Place your Barometer over the screw in the
hanger slot, until it locks into place.

MAINTENANCE

The following suggestions will help you care for the
barometer so you can enjoy it for years.
1. Keep the Barometer dry. If it gets wet, wipe it dry
immediately. Liquid might contain minerals that can
corrode the electronic circuits.
2. Use and store the Barometer only in normal
temperature environments. Temperature extremes
can shorten the life of electronic devices, damage
batteries, and distort or melt plastic parts.
3. Handle the Barometer gently and carefully. Dropping
it can damage circuit boards and cause the Barometer
to work improperly.
4. Keep the Barometer away from dust and dirt, which
can cause premature wear of parts.
5. Wipe the Barometer with a damp cloth occasionally
to keep it looking new. Do not use harsh chemicals,
cleaning solvents, or strong detergents to clean the
barometer.
6. Use only fresh batteries of the required size and type.
Always remove old or weak batteries. They can leak
chemicals that can destroy electronic circuits.
7. Modifying or tampering with the Barometer's internal
components can cause a malfunction and might
invalidate its warranty.

SPECIFICATIONS

Operating temperature
Temperature measuring range
(unit: Indoor sensor)
Temperature measuring range
(probe: Outdoor sensor)
Temperature display resolution 0.1°C (0.2°F)
Temperature sampling cycle
Humidity measuring range
Humidity display resolution
Pressure sampling cycle
Clock accuracy
Power source
Battery life
9
0°C to +50°C
(+32°F to +122°F)
0°C to +50°C
(+32°F to +122°F)
-50°C to 70°C
(-58°F to +158°F)
9 seconds
1%RH
9 seconds
15 minutes
±0.5 secs per day
Four pcs. UM-4 or
'AAA' size batteries
Approx. 1 Year