6. Insert two Barrel Nuts (7) into each end of the Mattress Side Rails (H). Be sure that the cross slot on the
Barrel Nut faces out and the threaded hole points towards the entry of the bolt along the rail.
7. Bolt two Mattress Side Rails (H) between the assembled headboard and footboard by using the 100 mm
Bolts (1) through the drilled holes on the posts and screw into the Barrel Nuts (7) in the Mattress Side
Rails (H). Make sure that the wood stoppers attached to the Mattress Side Rail for slats are up and face
inward.
ASSEMBLY INSTRUCTIONS
1/4" x 100 mm Bolt
(8 used in this step)
①
6
Barrel Nut
(8 used in this step)
⑦