starter (electric-start model only) to blow the excess
oil from the cylinder.
3. Install the spark plug and tighten it with a torque
wrench to 20 N-m (15 ft-lb).
4. Perform any maintenance procedures; refer to
Maintenance (page
14).
5. Check the engine-oil level; refer to
Engine-Oil Level (page
6. Fill the fuel tank with fresh gasoline; refer to
Fuel Tank (page
7).
7. Connect the wire to the spark plug.
8. Charge the battery for 24 hours (electric-start model
only); refer to
3 Charging the Battery (page
Checking the
7).
Filling the
5).
20