Maintenance And Storage; Technical Parameters - LUND 67840 Manual De Instrucciones

outlet opening has a plug. The plug should be open during operation (IX). It may only be closed while the juice container is being
emptied. If the plug is closed during operation, the bowl will overfi ll with juice, which can lead to juice leakage and electric shock.
If, during operation, the auger stops, for example due to placing too hard a fruit or vegetable in a bowl of product. You can fi rst try
changing the speed of the auger by pressing and holding the switch in the "R" position and then resuming operation. If this does
not work, turn the product off using the switch, unplug the power cord from the socket, then remove the product and remove the
cause of the jam from the product bowl.
Before resuming operation, check that no parts of the product have been damaged.
When you have fi nished squeezing the juice, turn off the product using the switch, wait for the rotation to stop completely, unplug
the power cord from the socket, remove the device and proceed with maintenance.

MAINTENANCE AND STORAGE

Caution! As the product is used for food preparation, maintenance must be carried out as soon as work is completed. Only proper
maintenance will ensure the proper level of hygiene.
When you have fi nished squeezing the juice, turn off the product, wait for rotation to stop completely, unplug the power cord from
the wall socket, disassemble the device and proceed with maintenance. The product should be cleaned immediately after use.
Dried fruit and vegetable residues can clog the openings of the fi lter cartridge, which can lead to a loss of performance or even
damage the product. If this happens, immerse the fi lter cartridge in warm water with dishwashing liquid and leave it to soak, then
clean with a soft brush and water with dishwashing liquid. Do not use metal brushes or dishwashers to clean the fi lter cartridge.
Excessive cleaning pressure may damage the cartridge walls.
In addition to the fi lter cartridge, all the parts that can be removed from the drive housing can also be immersed: bowl, juice and
pulp containers, bowl lid, pusher, frame with blades. All the above parts should be washed in the same way as the fi lter cartridge.
For cleaning, open the two plugs on the inside of the pulp outlet and the outside of the juice outlet. The plugs may only be closed
after the bowl has been cleaned and completely dried.
Clean the device housing with a soft cloth dampened with a water and mild detergent solution. Wipe dry. Do not use abrasive
cleaning agents.
Make sure all parts are cleaned and dried before connecting the device to the power supply. Store the product in dry, shaded
conditions. Protect the storage place from unauthorised access, especially by children. Store the product in the unit packaging
provided with the product. Do not place anything on the product.

TECHNICAL PARAMETERS

Parameter
Catalogue No.
Rated voltage
Rated frequency
Rated power
Rotational speed
Electrical protection class
Degree of protection of the housing (IP)
Juice/pulp container capacity
Inlet opening diameter
Weight
O R I G I N A L
12
GB
Unit of Measure
[V~]
[Hz]
[W]
[min -1 ]
[l]
[mm]
[kg]
I N S T R U C T I O N S
Value
67840
220 - 240
50 / 60
150
65
I
IPX0
1.0
-
2.8
Value
67841
220 - 240
50 / 60
150
65
I
IPX0
1.0
75
3.1