Idiomas disponibles

Idiomas disponibles

H-953
LEG KIT FOR H-951
SHRINK TUNNEL
TOOLS NEEDED
10 mm Socket
Socket Wrench
13 mm Socket
INCLUDED HARDWARE
Bolt x 12
Washer x 12
1.
Remove outer corrugated box from pallet.
(See Figure 1)
Figure 1
2. Using 13 mm socket,
remove two bolts that
secure shrink tunnel to
pallet. (See Figure 2)
3. Place forklift in front of
shrink tunnel with the
forks close together.
(See Figure 3)
PAGE 1 OF 12
1-800-295-5510
uline.com
Locking Washer x 12
INSTALLING LEG KIT USING FORKLIFT
Figure 2
Figure 3
Pour le français, consulter les pages 9-12.
Two Person Assembly
Recommended
4. With two people, lift
and slide tunnel onto
the forks. Once unit
is secured, raise the
forks upward to a
comfortable working
height. (See Figure 4)
5. Using 10 mm socket,
remove two metal
straps that secured the
tunnel to pallet.
(See Figure 5)
6. Using 10 mm socket,
remove four rubber
bumpers. (See Figure 6)
Para Español, vea páginas 5-8.
Figure 4
Figure 5
Figure 6
0521 IH-953
Tabla de contenido
loading

Resumen de contenidos para Uline H-953

  • Página 5: Kit De Patas Para H-951 Túnel Termoencogible

    H-953 800-295-5510 uline.mx KIT DE PATAS PARA H-951 TÚNEL TERMOENCOGIBLE HERRAMIENTAS NECESARIAS Dado de 10 mm Llave de Dado Dado de 13 mm TORNILLERÍA INCLUIDA Se recomienda armar entre dos personas. 12 Pernos 12 Rondanas 12 Rondanas de Bloqueo INSTALACIÓN DEL KIT DE PATAS UTILIZANDO MONTACARGAS Retire la caja de cartón externa de la tarima.
  • Página 6 INSTALLING LEG KIT USING FORKLIFT CONTINUED Retire el set de patas y la tornillería incluida de la 9. Fije la pata al túnel Diagrama 9 caja. (Vea Diagrama 7) con seis pernos, tres en cada esquina. (Vea Diagrama 9) Diagrama 7 10.
  • Página 7: Instalación Del Kit De Patas Sin Usar Montacargas

    INSTALACIÓN DEL KIT DE PATAS SIN USAR MONTACARGAS NOTA: Necesitará dos tablas de madera de 5. Ponga el túnel termoencogible encima de las tablas con la base del túnel expuesta. 2 x 4" para este proceso. (Vea Diagrama 14) Retire la caja de cartón externa de la tarima. (Vea Diagrama 11) Diagrama 14 Diagrama 11...
  • Página 8: Continuación De Instalación Del Kit De Patas Sin Usar Montacargas

    (Vea Diagrama 19) Diagrama 19 11. Fije la pata al túnel con seis pernos, seis rondanas y seis rondanas de bloqueo. Use tres en cada esquina. (Vea Diagrama 20) Diagrama 20 800-295-5510 uline.mx PAGE 8 OF 12 0521 IH-953...

Tabla de contenido