Idiomas disponibles
Idiomas disponibles
3.
Drill pilot holes using a 7/32 in. (5 mm) diameter drill bit. Remove wall plate template
IMPORTANT: Be sure to drill into the center of the studs.
IMPORTANT: Pilot holes must be drilled to a depth of 3 in. (75 mm).
4.
Install wall plate
using lag bolts
15
the wall plate
.
15
CAUTION:
Avoid potential personal injury or property damage! All four lag bolts MUST BE firmly tightened to prevent unwanted movement
of the wall plate
. Ensure the wall plate is securely fastened to the wall before continuing on to the next step.
15
3
14
and washers
. Tighten the lag bolts
16
17
3 in.
(75 mm)
7/32 in.
(5 mm)
.
14
only until the washers
16
4
15
are pulled firmly against
17
17
16
9
