Safety Instructions; Electrical Safety - Black and Decker KX2001 Manual Del Usuario

Intended use
Your Black & Decker heat gun has been designed for various
heating applications such as paint stripping. This product is
intended for consumer use and indoor use only.

Safety instructions

General power tool safety warn-
ings
@
Warning! Read all safety
warnings and all instruc-
tions. Failure to follow the warn-
ings and instructions listed below
may result in electric shock, fire and/
or serious injury.
Save all warnings and instruc-
tions for future reference. The term
"power tool" in all of the warnings listed below
refers to your mains operated (corded) power
tool or battery operated (cordless) power tool.
1. Work area safety
a. Keep work area clean and well
lit. Cluttered or dark areas invite accidents.
b. Do not operate power tools in
explosive atmospheres, such
as in the presence of
flammable liquids, gases or
dust. Power tools create sparks which
may ignite the dust or fumes.
c. Keep children and bystanders
away while operating a power
tool. Distractions can cause you to lose
control.
(Original instructions)

2. Electrical safety

a. Power tool plugs must match
the outlet. Never modify the
plug in any way. Do not use
any adapter plugs with earthed
(grounded) power tools.
Unmodified plugs and matching outlets will
reduce risk of electric shock.
b. Avoid body contact with
earthed or grounded surfaces
such as pipes, radiators,
ranges and refrigerators. There is
an increased risk of electric shock if your
body is earthed or grounded.
c. Do not expose power tools to
rain or wet conditions. Water
entering a power tool will increase the risk of
electric shock.
d. Do not abuse the cord. Never
use the cord for carrying,
pulling or unplugging the
power tool. Keep cord away
from heat, oil, sharp edges or
moving parts. Damaged or entangled
cords increase the risk of electric shock.
e. When operating a power tool
outdoors, use an extension
cord suitable for outdoor use.
Use of a cord suitable for outdoor use
reduces the risk of electric shock.
f. If operating a power tool in a
damp location is unavoidable,
use a residual current device
(RCD) protected supply. Use of an
RCD reduces the risk of electric shock.
ENGLISH
3