Technical Data; Notes On Safety; Symbols And Icons - Deltafox DP - CAG 2015 Traducción Del Manual De Instrucciones Original

Technical data

Cordless Angle Grinder
Rated input voltage .......................
Measurement idling speed (n) ..8000 min
Dimensions of the cutting/
roughing discs ...............Ø
Weight (incl. accessories) .............. 2.0 kg
Thickness of the cutting/
roughing discs ........................
Grinding spindle thread ......................M14
Thread length of the
grinding spindle .................... max.
Protection category ...........................
Sound pressure level
(L ) ......................75.7 dB(A); K
pA
Sound power level (L
measured ............ 86,7dB(A); K
Vibration values (a
............................ 5.642 m/s
The actual vibration values may vary de-
pending on the used accessories. The
vibration values are still affected by the
handling of the user's.
Noise and vibration values have been de-
termined according to the standards and
regulations mentioned in the declaration
of conformity.
Technical and optical changes may be
undertaken in the course of further devel-
opment without notice. All dimensions,
references and information in this instruc-
tion manual are therefore not guaranteed.
Legal claims made on the basis of the
instruction manual can therefore not be
considered as valid.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to
compare one power tool to another.
The stated vibration emission value may
DP-CAG 2015
20 V
115 x 22.2 mm
max. 6 mm
12 mm
= 3 dB
pA
)
WA
= 3 dB
WA
)
h
; K= 1,5 m/s
2
also be used for a preliminary exposure
assessment.
Warning:
The vibration emission value whilst
-1
actually using the electrical tool
may vary from the given values in-
dependently of the type and way in
which the electric tool is used.
Safety measures for the protection
of the operator are to be deter-
mined that are based on an esti-
mate of the actual exposure under
IPX0 the real operating conditions (for
this, all parts of the operating cycle
are to be taken into account, for
example, times in which the elec-
tric tool is turned off, and those
during which it is turned on but
running without a load).
2

Notes on safety

Caution! When using power tools,
observe the following basic safety
measures for the prevention of elec-
tric shocks and the risk of injury and
fire.
Please read all these instructions
before using this electric tool and
please keep the safety instructions.

Symbols and icons

Symbols on the device:
Warning!
Risk of injury from the rotating
tool! Keep hands away
Remove the battery from the unit
before servicing it.
GB
27