Hdd Installation - ICY BOX IB-166SSK-B Manual De Instrucciones

http://www.icybox.de http://www.icybox.de
4.2 Connecting the IB-166SSK-B

4.3 HDD Installation

1. Open the door
3. Close the door to push the HDD into the
IB-166SSK-B until the door is locked
IB-166SSK-B
3. Use two screws on each side to securely
hold the device. The installation-direction
must be right: Lock at the left side!
1. Connect one end of the SATA 15Pin power
cable to the rear side of the IB-166SSK-B,
another end (Molex 4Pin Power) to the
power supply of your PC.
2. Connect the SATA 7Pin data cable to the
connector on the rear side of the IB-166SSK-B,
another end to the SATA 7Pin data port on
the main board (or SATA RAID card) of your PC.
2. Place the HDD (label side up)
inside the IB-166SSK-B
5 5