Norstar CTA 150i Guia De Instalacion página 11

Norstar TAPI SP installation
Norstar TAPI SP software installation
This section describes the procedures that must be performed to install the
Norstar TAPI SP.
Pre-installation checklist
Before installing the software, complete the following pre-installation
checklist.
1. Verify that your PC meets the minimum hardware and software
requirements. Verify that the interface device is connected and that the
telephone connected to the interface device is operational. Make sure
that the telephone has at least one DN key to support dialing and
answering calls from the TAPI application.
2. Ensure that a previous version of the Norstar TAPI Service Provider is
not running, by following these steps:
a) Locate the Control Panel icon as follows:
(Windows 3.1) Double-click the Main program group in the
Program Manager.
The Main group displays.
(Windows 95) Double-click the My Computer icon.
The My Computer group displays.
b) Double-click the Control Panel icon.
The Control Panel window displays the Telephony icon.
c) Double-click the Telephony icon, if it appears. (If it does not
appear, the Norstar TAPI Service Provider is not running.)
(Windows 3.1) The Telephony dialog box displays.
(Windows 95) The Telephony Properties dialog box displays.
d) (Windows 3.1) Click Driver Setup.
The Telephony Drivers dialog box displays. If there is a Norstar
Telephony SP entry, click Remove to uninstall it. Restart the PC
before proceeding with the installation.
(Windows 95) If there is a Norstar Telephony SP entry, click
Remove to uninstall it. Restart the PC before proceeding with the
installation.
Computer Telephony Adapter 150 Installation Guide
Norstar TAPI SP installation 9