Modecom MC-7200 Manual Del Usuario página 15

MC-7200
Wireless Combo
Introduction
MODECOM MC-7200 is combo set of wire-
less keyboard and mouse. It is using radio
Nano receiver that is working in 2.4GHz
frequency. Both keyboard and mouse use
the same receiver, hence only one USB
port is used for working with two devices.
Specification
Keyboard:
Number of keys: 104
Dimensions: (L*W*H): 451*130*26mm
Fn keys: 12
Power: 2x AAA batteries 1.5V (included)
Power consumption: 3V
Weight: 420g
Mouse:
Sensor: Optical
Resolution (dpi): 800/1200/1600
DPI button
Dimensions: (L*W*H): 96*64*37mm
Power: AA battery 1.5V (included)
Power consumption: 1.5V
Weight: 50g
Installation
1. Take the wireless combo from box (Nano
receiver is put directly in box or is under
the keyboard).
2. Put the Nano receiver to the computer
USB interface.
3. Put the 2 pcs of AAA dry alkaline batter-
ies into keyboard and 1 pcs AA dry alkaline
battery to the mouse by right direction.
4. The keyboard can be used when the
LED indicator blink for seconds.
Reconnection for the
keyboard
1. Plug off the receiver from USB port and
plug again.
2. Press "ESC" & "K" for 3 seconds at the
same time, and then release, keyboard will
be ready for work when the LED blink.
Reconnection for the mouse
1. Plug off the Nano receiver from USB
port, and plug it on.
2. Move RF mouse within 50cm to Nano
receiver, re-install the battery in the mouse,
press any key to reconnect.
Cautions
3mA
1, Only the AAA dry alkaline battery is
available for the keyboard, please take out
batteries when you do not need to use the
keyboard for a long time.
2. Combo uses 2.4GHZ wireless RF trans-
mission, 10 meters working range. When
there are some barriers, working distance
will be shortened.
6.5mA
3. Protect against children.
UK
15